The PHREG Procedure

BAYES Statement

BAYES <options>;

The BAYES statement requests a Bayesian analysis of the regression model by using Gibbs sampling. The Bayesian posterior samples (also known as the chain) for the regression parameters can be output to a SAS data set. Table 4 summarizes the options available in the BAYES statement.

Table 4: BAYES Statement Options

Option	Description
Monte Carlo Options
INITIAL=	Specifies initial values of the chain
NBI=	Specifies the number of burn-in iterations
NMC=	Specifies the number of iterations after burn-in
SAMPLING=	Specifies the sampling algorithm
SEED=	Specifies the random number generator seed
THINNING=	Controls the thinning of the Markov chain
Model and Prior Options
COEFFPRIOR=	Specifies the prior of the regression coefficients
DISPERSIONPRIOR=	Specifies the prior of the dispersion parameter for frailties
PIECEWISE=	Specifies details of the piecewise exponential model
SPLINE=	Specifies details of the proportional hazards spline model
Summaries and Diagnostics of the Posterior Samples
DIAGNOSTICS=	Displays convergence diagnostics
PLOTS=	Displays diagnostic plots
STATISTICS=	Displays summary statistics
Posterior Samples
OUTPOST=	Names a SAS data set for the posterior samples

The following list describes these options and their suboptions.

specifies the prior distribution for the regression coefficients. The default is COEFFPRIOR=UNIFORM. The following prior distributions are available:

UNIFORM

specifies a flat prior—that is, the prior that is proportional to a constant ( for all ).

NORMAL<(normal-option)>

specifies a normal distribution. The normal-options include the following:

INPUT=SAS-data-set: specifies a SAS data set that contains the mean and covariance information of the normal prior. The data set must contain the _TYPE_ variable to identify the observation type, and it must contain a variable to represent each regression coefficient. If the data set also contains the _NAME_ variable, values of this variable are used to identify the covariances for the _TYPE_=’COV’ observations; otherwise, the _TYPE_=’COV’ observations are assumed to be in the same order as the explanatory variables in the MODEL statement. PROC PHREG reads the mean vector from the observation with _TYPE_=’MEAN’ and the covariance matrix from observations with _TYPE_=’COV’. For an independent normal prior, the variances can be specified with _TYPE_=’VAR’; alternatively, the precisions (inverse of the variances) can be specified with _TYPE_=’PRECISION’.
RELVAR <=c>: specifies a normal prior , where is a diagonal matrix with diagonal elements equal to the variances of the corresponding ML estimator. By default, c=1E6.
VAR=c: specifies the normal prior , where is the identity matrix.

If you do not specify a normal-option, the normal prior , where is the identity matrix, is used. For more information, see the section Normal Prior.

ZELLNER<(zellner-option)>

specifies the Zellner g-prior for the regression coefficients. The g-prior is a normal prior distribution with mean zero and covariance matrix equal to , where is the design matrix and g can be a constant or a parameter with a gamma prior. The zellner-options include the following:

G=number: specifies a constant number for g.
GAMMA <(SHAPE=a ISCALE=b)>: specifies that g has a gamma prior distribution with density . By default, a=b=1E–4.

If you do not specify a zellner-option, the default is ZELLNER(g=1E–6).

DISPERSIONPRIOR=GAMMA<(gamma-options)> | IGAMMA<(igamma-options)> | IMPROPER DPRIOR=GAMMA<(gamma-options)> | IGAMMA<(igamma-options)> | IMPROPER

specifies the prior distribution of the dispersion parameter. For gamma frailty, the dispersion parameter is the variance of the gamma frailty; for lognormal frailty, the dispersion parameter is the variance of the normal random component. The default is DISPERSIONPRIOR=IMPROPER.

You can specify the following values for this option:

GAMMA<(gamma-options)>

specifies the gamma prior. A gamma prior with hyperparameters a and b has density , where a is the shape parameter and b is the inverse-scale parameter. You can use the following gamma-options enclosed in parentheses to specify the hyperparameters:

SHAPE=a ISCALE=b: results in a prior when both gamma-options are specified.
SHAPE=c: results in a prior when specified alone.
ISCALE=c: results in a prior when specify alone.

The default is SHAPE=1E–4 and ISCALE=1E–4.

IGAMMA<(igamma-options)>

specifies the inverse gamma prior. An inverse gamma prior with hyperparameters a and b has a density , where a is the shape parameter and b is the scale parameter. You can use the following igamma-options enclosed in parentheses to specify the hyperparameters:

SHAPE=a SCALE=b: results in a prior when both igamma-options are specified.
SHAPE=c: results in a prior when specified alone.
SCALE=c: results in a prior when specified alone.

The default is SHAPE=2.001 AND SCALE=0.01.

IMPROPER

specifies the improper prior, which has a density proportional to .

controls the number of diagnostics produced. You can request all the diagnostics in the following list by specifying DIAGNOSTICS=ALL. If you do not want any of these diagnostics, you specify DIAGNOSTICS=NONE. If you want some but not all of the diagnostics, or if you want to change certain settings of these diagnostics, you specify a subset of the following keywords. The default is DIAGNOSTICS=(AUTOCORR GEWEKE ESS).

AUTOCORR <(LAGS= numeric-list)>

computes the autocorrelations of lags given by LAGS= list for each parameter. Elements in the list are truncated to integers and repeated values are removed. If the LAGS= option is not specified, autocorrelations of lags 1, 5, 10, and 50 are computed for each variable. For more information, see the section Autocorrelations in Chapter 8, Introduction to Bayesian Analysis Procedures.

ESS

computes the effective sample size of Kass et al. (1998), the correlation time, and the efficiency of the chain for each parameter. For more information, see the section Effective Sample Size in Chapter 8, Introduction to Bayesian Analysis Procedures.

MCSE MCERROR

computes the Monte Carlo standard error for each parameter. The Monte Caro standard error, which measures the simulation accuracy, is the standard error of the posterior mean estimate and is calculated as the posterior standard deviation divided by the square root of the effective sample size. For more information. see the section Standard Error of the Mean Estimate in Chapter 8, Introduction to Bayesian Analysis Procedures.

HEIDELBERGER <(heidel-options)>

computes the Heidelberger and Welch tests for each parameter. For more information, see the section Heidelberger and Welch Diagnostics in Chapter 8, Introduction to Bayesian Analysis Procedures. The tests consist of a stationary test and a halfwidth test. The former tests the null hypothesis that the sample values form a stationary process. If the stationarity test is passed, a halfwidth test is then carried out. Optionally, you can specify one or more of the following heidel-options:

SALPHA=value: specifies the level for the stationarity test. The default is the value of the ALPHA= option in the PROC PHREG statement, or 0.05 if that option is not specified.
HALPHA=value: specifies the level for the halfwidth test. The default is the value of the ALPHA= option in the PROC PHREG statement, or 0.05 if that option is not specified.
EPS=value: specifies a small positive number such that if the halfwidth is less than times the sample mean of the retaining samples, the halfwidth test is passed.

GELMAN <(gelman-options)>

computes the Gelman and Rubin convergence diagnostics. For more information, see the section Gelman and Rubin Diagnostics in Chapter 8, Introduction to Bayesian Analysis Procedures. You can specify one or more of the following gelman-options:

NCHAIN=number N=number: specifies the number of parallel chains used to compute the diagnostic and has to be 2 or larger. The default is NCHAIN=3. The NCHAIN= option is ignored when the INITIAL= option is specified in the BAYES statement, and in such a case, the number of parallel chains is determined by the number of valid observations in the INITIAL= data set.
ALPHA=value: specifies the significance level for the upper bound. The default is the value of the ALPHA= option in the PROC PHREG statement, or 0.05 if that option is not specified (resulting in a 97.5% bound).

GEWEKE <geweke-options>

computes the Geweke diagnostics. For more information, see the section Geweke Diagnostics in Chapter 8, Introduction to Bayesian Analysis Procedures. The diagnostic is essentially a two-sample t-test between the first portion and the last portion of the chain. The default is =0.1 and =0.5, but you can choose other fractions by using the following geweke-options:

FRAC1=value: specifies the early fraction of the Markov chain.
FRAC2=value: specifies the latter fraction of the Markov chain.

RAFTERY <(raftery-options)>

computes the Raftery and Lewis diagnostics. For more information, see the section Raftery and Lewis Diagnostics in Chapter 8, Introduction to Bayesian Analysis Procedures. The diagnostic evaluates the accuracy of the estimated quantile ( for a given ) of a chain. can achieve any degree of accuracy when the chain is allowed to run for a long time. A stopping criterion is when the estimated probability reaches within of the value Q with probability S; that is, . The following raftery-options enable you to specify and a precision level for a stationary test.

QUANTILE=value Q=value: specifies the order (a value between 0 and 1) of the quantile of interest. The default is 0.025.
ACCURACY=value R=value: specifies a small positive number as the margin of error for measuring the accuracy of estimation of the quantile. The default is 0.005.
PROBABILITY=value S=value: specifies the probability of attaining the accuracy of the estimation of the quantile. The default is 0.95.
EPSILON=value EPS=value: specifies the tolerance level (a small positive number) for the test. The default is 0.001.

INITIAL=SAS-data-set

specifies the SAS data set that contains the initial values of the Markov chains. The INITIAL= data set must contain a variable for each parameter in the model. You can specify multiple rows as the initial values of the parallel chains for the Gelman-Rubin statistics, but posterior summary statistics, diagnostics, and plots are computed only for the first chain.

NBI=number

specifies the number of burn-in iterations before the chains are saved. The default is 2000.

NMC=number

specifies the number of iterations after the burn-in. The default is 10000.

OUTPOST=SAS-data-set OUT=SAS-data-set

names the SAS data set that contains the posterior samples. For more information, see the section OUTPOST= Output Data Set in the BAYES Statement. Alternatively, you can output the posterior samples into a data set, as shown in the following example in which the data set is named PostSamp.

ODS OUTPUT PosteriorSample = PostSamp;

PIECEWISE <=keyword <(<NINTERVAL=number> <INTERVALS=(numeric-list)> <PRIOR=option>)>>

specifies that the piecewise constant baseline hazard model be used in the Bayesian analysis. You can specify one of the following two keywords:

HAZARD: models the baseline hazard parameters in the original scale. The hazard parameters are named Lambda1, Lambda2, , and so on.
LOGHAZARD: models the baseline hazard parameters in the log scale. The log-hazard parameters are named Alpha1, Alpha2, , and so on.

Specifying PIECEWISE by itself is the same as specifying PIECEWISE=LOGHAZARD.

You can choose one of the following two options to specify the partition of the time axis into intervals of constant baseline hazards:

NINTERVAL=number N=number: specifies the number of intervals with constant baseline hazard rates. PROC PHREG partitions the time axis into the given number of intervals with approximately equal number of events in each interval.
INTERVALS=(numeric-list) INTERVAL=(numeric-list): specifies the list of numbers that partition the time axis into disjoint intervals with constant baseline hazard in each interval. For example, INTERVALS=(100, 150, 200, 250, 300) specifies a model with a constant hazard in the intervals [0,100), [100,150), [150,200), [200,250), [250,300), and [300,). Each interval must contain at least one event; otherwise, the posterior distribution can be improper, and inferences cannot be derived from an improper posterior distribution.

If neither NINTERVAL= nor INTERVALS= is specified, the default is NINTERVAL=8.

To specify the prior for the baseline hazards () in the original scale, you specify the following:

PRIOR = IMPROPER | UNIFORM | GAMMA<(gamma-option)> | ARGAMMA<(argamma-option)>

The default is PRIOR=IMPROPER. The available prior options include the following:

IMPROPER

specifies the noninformative and improper prior for all .

UNIFORM

specifies a uniform prior on the real line; that is, for all .

GAMMA <(gamma-option)>

specifies an independent gamma prior with density , which can be followed by one of the following gamma-options enclosed in parentheses. The hyperparameters a and b are the shape and inverse-scale parameters of the gamma distribution, respectively. For more information, see the section Independent Gamma Prior. The default is for each , setting the prior mean to 1 with variance 1E4. This prior is proper and reasonably noninformative.

INPUT=SAS-data-set: specifies a data set containing the hyperparameters of the independent gamma prior. The data set must contain the _TYPE_ variable to identify the observation type, and it must contain the variables named Lambda1, Lambda2, …, and so forth, to represent the hazard parameters. The observation with _TYPE_=’SHAPE’ identifies the shape parameters, and the observation with _TYPE_=’ISCALE’ identifies the inverse-scale parameters.
RELSHAPE<=c>: specifies independent distribution, where ’s are the MLEs of the hazard rates. This prior has mean and variance . By default, c=1E–4.
SHAPE=a and ISCALE=b: together specify the prior.
SHAPE=c ISCALE=c: specifies the prior.

ARGAMMA <(argamma-option)>

specifies an autoregressive gamma prior of order 1, which can be followed by one of the following argamma-options. For more information, see the section AR1 Prior.

INPUT=SAS-data-set: specifies a data set containing the hyperparameters of the correlated gamma prior. The data set must contain the _TYPE_ variable to identify the observation type, and it must contain the variables named Lambda1, Lambda2, …, and so forth, to represent the hazard parameters. The observation with _TYPE_=’SHAPE’ identifies the shape parameters, and the observation with _TYPE_=’ISCALE’ identifies the relative inverse-scale parameters; that is, if and are, respectively, the SHAPE and ISCALE values for , then , and for .
SHAPE=a and SCALE=b: together specify that and for .
SHAPE=c ISCALE=c: specifies that and for .

To specify the prior for , the hazard parameters in the log scale, you specifying the following:

PRIOR=UNIFORM | NORMAL<(normal-option)>

specifies the prior for the loghazard parameters. The default is PRIOR=UNIFORM. The available PRIOR= options are as follows:

UNIFORM

specifies the uniform prior on the real line; that is, for all .

NORMAL<(normal-option)>

specifies a normal prior distribution on the log-hazard parameters. The normal-options include the following. If you do not specify a normal-option, the normal prior , where is the identity matrix, is used.

INPUT=SAS-data-set

specifies a SAS data set containing the mean and covariance information of the normal prior. The data set must contain the _TYPE_ variable to identify the observation type, and it must contain variables named Alpha1, Alpha2, …, and so forth, to represent the log-hazard parameters. If the data set also contains the _NAME_ variable, the value of this variable will be used to identify the covariances for the _TYPE_=’COV’ observations; otherwise, the _TYPE_=’COV’ observations are assumed to be in the same order as the explanatory variables in the MODEL statement. PROC PHREG reads the mean vector from the observation with _TYPE_=’MEAN’ and the covariance matrix from observations with _TYPE_=’COV’. For more information, see the section Normal Prior. For an independent normal prior, the variances can be specified with _TYPE_=’VAR’; alternatively, the precisions (inverse of the variances) can be specified with _TYPE_=’PRECISION’.

If you have a joint normal prior for the log-hazard parameters and the regression coefficients, specify the same data set containing the mean and covariance information of the multivariate normal distribution in both the COEFFPRIOR=NORMAL(INPUT=) and the PIECEWISE=LOGHAZARD(PRIOR=NORMAL(INPUT=)) options. For more information, see the section Joint Multivariate Normal Prior for Log-Hazards and Regression Coefficients.

RELVAR <=c>

specifies the normal prior , where is a diagonal matrix with diagonal elements equal to the variances of the corresponding ML estimator. By default, c=1E6.

VAR=c

specifies the normal prior , where is the identity matrix.

PLOTS <(global-plot-options)> = plot-request PLOTS <(global-plot-options)> = (plot-requests)

controls the diagnostic plots produced through ODS Graphics. Three types of plots can be requested: trace plots, autocorrelation function plots, and kernel density plots. By default, the plots are displayed in panels unless the global plot option UNPACK is specified. If you specify more than one type of plots, the plots are displayed by parameters unless the global plot option GROUPBY=TYPE is specified. When you specify only one plot request, you can omit the parentheses around the plot request. For example:

 plots=none
 plots(unpack)=trace
 plots=(trace autocorr)

ODS Graphics must be enabled before plots can be requested. For example:

ods graphics on;
proc phreg;
   model y=x;
   bayes plots=trace;
run;

If ODS Graphics is enabled but you do not specify the PLOTS= option in the BAYES statement, then PROC PHREG produces, for each parameter, a panel that contains the trace plot, the autocorrelation function plot, and the density plot. This is equivalent to specifying plots=(trace autocorr density).

The global-plot-options include the following:

FRINGE

creates a fringe plot on the X axis of the density plot.

GROUPBY = PARAMETER | TYPE

specifies how the plots are to be grouped when there is more than one type of plots. The choices are as follows:

TYPE: specifies that the plots be grouped by type.
PARAMETER: specifies that the plots be grouped by parameter.

GROUPBY=PARAMETER is the default.

SMOOTH

displays a fitted penalized B-spline curve each trace plot.

UNPACKPANEL UNPACK

specifies that all paneled plots be unpacked, meaning that each plot in a panel is displayed separately.

The plot-requests include the following:

ALL: specifies all types of plots. PLOTS=ALL is equivalent to specifying PLOTS=(TRACE AUTOCORR DENSITY).
AUTOCORR: displays the autocorrelation function plots for the parameters.
DENSITY: displays the kernel density plots for the parameters.
NONE: suppresses all diagnostic plots.
TRACE: displays the trace plots for the parameters. For more information, see the section Visual Analysis via Trace Plots in Chapter 8, Introduction to Bayesian Analysis Procedures.

Consider a model with four parameters, X1–X4. Displays for various specification are depicted as follows.

PLOTS=(TRACE AUTOCORR) displays the trace and autocorrelation plots for each parameter side by side with two parameters per panel:

Display 1	Trace(X1)	Autocorr(X1)
	Trace(X2)	Autocorr(X2)
Display 2	Trace(X3)	Autocorr(X3)
	Trace(X4)	Autocorr(X4)

PLOTS(GROUPBY=TYPE)=(TRACE AUTOCORR) displays all the paneled trace plots, followed by panels of autocorrelation plots:

Display 1	Trace(X1)
	Trace(X2)
Display 2	Trace(X3)
	Trace(X4)
Display 3	Autocorr(X1)	Autocorr(X2)
	Autocorr(X3)	Autocorr(X4)

PLOTS(UNPACK)=(TRACE AUTOCORR) displays a separate trace plot and a separate correlation plot, parameter by parameter:

Display 1	Trace(X1)
Display 2	Autocorr(X1)
Display 3	Trace(X2)
Display 4	Autocorr(X2)
Display 5	Trace(X3)
Display 6	Autocorr(X3)
Display 7	Trace(X4)
Display 8	Autocorr(X4)

PLOTS(UNPACK GROUPBY=TYPE) = (TRACE AUTOCORR) displays all the separate trace plots followed by the separate autocorrelation plots:

Display 1	Trace(X1)
Display 2	Trace(X2)
Display 3	Trace(X3)
Display 4	Trace(X4)
Display 5	Autocorr(X1)
Display 6	Autocorr(X2)
Display 7	Autocorr(X3)
Display 8	Autocorr(X4)

SAMPLING=keyword

specifies the sampling algorithm used in the Markov chain Monte Carlo (MCMC) simulations. Two sampling algorithms are available:

ARMS GIBBS: requests the use of the adaptive rejection Metropolis sampling (ARMS) algorithm to draw the Gibbs samples.
RWM: requests the use of the random walk Metropolis (RWM) algorithm to draw the samples.

Both sampling algorithms can be applied to the Cox model and the piecewise constant hazards model; the default for these models is SAMPLING=ARMS. Only the RWM algorithm can be applied to the proportional hazards spline model and the frailty model. For more information about the MCMC sampling algorithms, see the section Markov Chain Monte Carlo Method in Chapter 8, Introduction to Bayesian Analysis Procedures.

SEED=number

specifies an integer seed that ranges from 1 to –1 for the random number generator in the simulation. Specifying a seed enables you to reproduce identical Markov chains for the same specification. If you omit the SEED= option, or if you specify a nonpositive seed, a random seed is derived from the time of day on the computer’s clock.

SPLINE < (<DF=number> <PRIOR=option>)> CUBICSPLINE < (<DF=number> <PRIOR=option>)>

used the proportional hazards spline model of Royston and Parmar (2002) in the Bayesian analysis. This is a proportional hazards model in which the logarithm of the baseline cumulative hazard function is a natural cubic spline function of the log time,

log left-bracket upper H 0 left-parenthesis t right-parenthesis right-bracket equals s left-parenthesis y comma bold-italic gamma right-parenthesis identical-to gamma 0 plus gamma 1 y plus gamma 2 v 1 left-parenthesis y right-parenthesis plus midline-horizontal-ellipsis plus gamma Subscript m plus 1 Baseline v Subscript m Baseline left-parenthesis y right-parenthesis

where represents the time on a log scale. The are the basis functions, which are computed as

v Subscript j Baseline left-parenthesis y right-parenthesis equals left-parenthesis y minus k Subscript j Baseline right-parenthesis Subscript plus Superscript 3 Baseline minus e Subscript j Baseline left-parenthesis y minus k Subscript normal m normal i normal n Baseline right-parenthesis Subscript plus Superscript 3 Baseline minus left-parenthesis 1 minus e Subscript j Baseline right-parenthesis left-parenthesis y minus k Subscript normal m normal a normal x Baseline right-parenthesis Subscript plus Superscript 3

where

StartLayout 1st Row 1st Column e Subscript j 2nd Column equals 3rd Column StartFraction k Subscript normal m normal a normal x Baseline minus k Subscript j Baseline Over k Subscript normal m normal a normal x Baseline minus k Subscript normal m normal i normal n Baseline EndFraction 2nd Row 1st Column left-parenthesis x minus a right-parenthesis Subscript plus 2nd Column equals 3rd Column normal m normal a normal x left-parenthesis 0 comma x minus a right-parenthesis EndLayout

Here, and are two terminal knots, and are m internal knots that are placed between and . The degrees of freedom equals . When , the log of the baseline hazard becomes , which corresponds to a common form of the Weibull model.

You can specify the degrees of freedom in the DF=number option, where number must be an integer. The number of knots equals number plus 1. By default, DF=2.

To specify the prior for , the parameters for the cubic splines, you specify the following option:

PRIOR=UNIFORM | NORMAL<(normal-option)>

specifies the prior for the cubic splines parameters. You can specify the following values:

UNIFORM

specifies the uniform prior on the real line; that is, for all .

NORMAL<(normal-option)>

specifies a normal prior distribution on the cubic spline parameters. If you do not specify a normal-option, the procedure uses the normal prior , where is the identity matrix. You can specify the following normal-options:

INPUT=SAS-data-set

specifies a SAS data set that contains the mean and covariance information of the normal prior. The data set must contain the _TYPE_ variable to identify the observation type, and it must contain variables named Gamma1, Gamma2, …, and so on, to represent the log-hazard parameters. If the data set also contains the _NAME_ variable, the value of this variable is used to identify the covariances for the _TYPE_='COV' observations; otherwise, the _TYPE_='COV' observations are assumed to be in the same order as the explanatory variables in the MODEL statement. PROC PHREG reads the mean vector from the observation for which _TYPE_='MEAN' and reads the covariance matrix from observations for which _TYPE_='COV'. For more information, see the section Normal Prior. For an independent normal prior, you can specify the variances by using _TYPE_='VAR'; alternatively, you can specify the precisions (inverse of the variances) by using _TYPE_='PRECISION'.

If you have a joint normal prior for the cubic splines parameters and the regression coefficients, specify the same data set containing the mean and covariance information of the multivariate normal distribution in both the COEFFPRIOR=NORMAL(INPUT=) and SPLINE(PRIOR=NORMAL(INPUT=)) options. For more information, see the section Joint Multivariate Normal Prior for Cubic Spline Parameters and Regression Coefficients.

RELVAR <=c>

specifies the normal prior , where is a diagonal matrix whose diagonal elements are equal to the variances of the corresponding ML estimator. By default, c=1E6.

VAR=c

specifies the normal prior , where is the identity matrix.

By default, PRIOR=UNIFORM.

controls the number of posterior statistics produced. Specifying STATISTICS=ALL is equivalent to specifying STATISTICS=(SUMMARY INTERVAL COV CORR). If you do not want any posterior statistics, you specify STATISTICS=NONE. The default is STATISTICS=(SUMMARY INTERVAL). For more information, see the section Summary Statistics in Chapter 8, Introduction to Bayesian Analysis Procedures.

You can specify the following global-options:

ALPHA=numeric-list: controls the probabilities of the credible intervals. The ALPHA= values must be between 0 and 1. Each ALPHA= value produces a pair of 100(1–ALPHA)% equal-tail and HPD intervals for each parameters. The default is the value of the ALPHA= option in the PROC PHREG statement, or 0.05 if that option is not specified (yielding the 95% credible intervals for each parameter).
PERCENT=numeric-list: requests the percentile points of the posterior samples. The PERCENT= values must be between 0 and 100. The default is PERCENT= 25, 50, 75, which yield the 25th, 50th, and 75th percentile points for each parameter.

You can specify the following values for a keyword or as part of a keyword-list. To specify a list, place parentheses around multiple keywords that are separated by spaces.

CORR: produces the posterior correlation matrix.
COV: produces the posterior covariance matrix.
SUMMARY: produces the means, standard deviations, and percentile points for the posterior samples. The default is to produce the 25th, 50th, and 75th percentile points, but you can use the global PERCENT= option to request specific percentile points.
INTERVAL: produces equal-tail credible intervals and HPD intervals. The default is to produce the 95% equal-tail credible intervals and 95% HPD intervals, but you can use the global ALPHA= option to request intervals of any probabilities.

THINNING=number THIN=number

controls the thinning of the Markov chain. Only one in every k samples is used when THINNING=k, and if NBI= and NMC=n, the number of samples kept is

left-bracket StartFraction n 0 plus n Over k EndFraction right-bracket minus left-bracket StartFraction n 0 Over k EndFraction right-bracket

where [a] represents the integer part of the number a. The default is THINNING=1.

Last updated: December 09, 2022