Deep Neural Network Action Set: Syntax
Provides actions for modeling and scoring with fully connected deep neural networks (DNN)
dnnCode Action
Generates DATA step scoring code from a deep neural network model.
Summary: Input and Output Tables
If a row includes a subparameter, you can specify the name, caslib, and so on in the subparameter. Otherwise, you can specify the name, caslib, and so on in the parameter.
|
Parameter |
Subparameter |
Description |
|---|---|---|
|
required parameterinitWeights |
— |
specifies an in-memory table that contains the model weights. These weights are used to initialize the model. |
|
required parametermodelTable |
— |
specifies the in-memory table that is the model. |
|
Parameter |
Subparameter |
Description |
|---|---|---|
|
casOut |
requests that the action produce SAS score code. Specify additional parameters. |
Parameter Descriptions
code={codegen}
requests that the action produce SAS score code. Specify additional parameters.
The codegen value can be one or more of the following:
casOut={casouttable}
specifies the settings for an output table.
For more information about specifying the casOut parameter, see the common casouttable parameter.
comment=TRUE | FALSE
when set to True, adds comments to the DATA step code.
| Default | FALSE |
|---|
fmtWdth=integer
specifies the width to use for formatting derived numbers such as parameter estimates in the DATA step code.
| Alias | fmtWidth |
|---|---|
| Default | 20 |
| Range | 0–32 |
indentSize=integer
specifies the number of spaces to indent the DATA step code for each level.
| Default | 3 |
|---|---|
| Range | 0–10 |
labelId=integer
specifies the label ID to use in array names and statement labels in the DATA step code. By default, a random positive integer is used.
lineSize=integer
specifies the line size for the generated code.
| Default | 120 |
|---|---|
| Range | 64–254 |
noTrim=TRUE | FALSE
when set to True, bases the comparison of variables with formatted values on the full format width with padding. By default, leading and trailing blanks are removed from the formatted values.
| Default | FALSE |
|---|
tabForm=TRUE | FALSE
when set to True, generates the code in a way that is appropriate for storing in a table.
| Alias | tableForm |
|---|---|
| Default | FALSE |
encodeName=TRUE | FALSE
specifies whether to encode variable names in the generated CASout table.
| Default | FALSE |
|---|
* initWeights={castable}
specifies an in-memory table that contains the model weights. These weights are used to initialize the model.
| Long form | initWeights={name="table-name"} |
|---|---|
| Shortcut form | initWeights="table-name" |
The castable value can be one or more of the following:
caslib="string"
specifies the caslib for the input table that you want to use with the action. By default, the active caslib is used. Specify a value only if you need to access a table from a different caslib.
computedOnDemand=TRUE | FALSE
when set to True, creates the computed variables when the table is loaded instead of when the action begins.
| Alias | compOnDemand |
|---|---|
| Default | FALSE |
computedVars={{casinvardesc-1} <, {casinvardesc-2}, ...>}
specifies the names of the computed variables to create. Specify an expression for each variable in the computedVarsProgram parameter. If you do not specify this parameter, then all variables from computedVarsProgram are automatically included.
| Alias | compVars |
|---|
The casinvardesc value can be one or more of the following:
format="string"
specifies the format to apply to the variable.
formattedLength=integer
specifies the length of format field plus the length of the format precision.
label="string"
specifies the descriptive label for the variable.
* name="variable-name"
specifies the name for the variable.
nfd=integer
specifies the length of the format precision.
nfl=integer
specifies the length of the format field.
computedVarsProgram="string"
specifies an expression for each computed variable that you include in the computedVars parameter.
| Alias | compPgm |
|---|
dataSourceOptions={key-1=any-list-or-data-type-1 <, key-2=any-list-or-data-type-2, ...>}
specifies data source options.
| Aliases | options |
|---|---|
| dataSource |
importOptions={fileType="ANY" | "AUDIO" | "AUTO" | "BASESAS" | "CSV" | "DOCUMENT" | "DTA" | "ESP" | "EXCEL" | "FMT" | "HDAT" | "IMAGE" | "JMP" | "LASR" | "PARQUET" | "SPSS" | "VIDEO" | "XLS", fileType-specific-parameters}
specifies the settings for reading a table from a data source.
| Alias | import |
|---|
For more information about specifying the importOptions parameter, see the common importOptions parameter.
* name="table-name"
specifies the name of the input table.
singlePass=TRUE | FALSE
when set to True, does not create a transient table on the server. Setting this parameter to True can be efficient, but the data might not have stable ordering upon repeated runs.
| Default | FALSE |
|---|
vars={{casinvardesc-1} <, {casinvardesc-2}, ...>}
specifies the variables to use in the action.
The casinvardesc value can be one or more of the following:
format="string"
specifies the format to apply to the variable.
formattedLength=integer
specifies the length of format field plus the length of the format precision.
label="string"
specifies the descriptive label for the variable.
* name="variable-name"
specifies the name for the variable.
nfd=integer
specifies the length of the format precision.
nfl=integer
specifies the length of the format field.
where="where-expression"
specifies an expression for subsetting the input data.
whereTable={groupbytable}
specifies an input table that contains rows to use as a WHERE filter. If the vars parameter is not specified, then all the variable names that are common to the input table and the filtering table are used to find matching rows. If the where parameter for the input table and this parameter are specified, then this filtering table is applied first.
The groupbytable value can be one or more of the following:
casLib="string"
specifies the caslib for the filter table. By default, the active caslib is used.
dataSourceOptions={adls_noreq-parameters | bigquery-parameters | cas_noreq-parameters | clouddex-parameters | db2-parameters | dnfs-parameters | esp-parameters | fedsvr-parameters | gcs_noreq-parameters | greenplum-parameters | hadoop-parameters | hana-parameters | hdfs-parameters | impala-parameters | jdbc-parameters | mongodb-parameters | mysql-parameters | netezza-parameters | odbc-parameters | oracle-parameters | path-parameters | postgres-parameters | redshift-parameters | s3-parameters | sapiq-parameters | sforce-parameters | snowflake-parameters | spark-parameters | spde-parameters | sqlserver-parameters | ss_noreq-parameters | teradata-parameters | vertica-parameters | yellowbrick-parameters}
specifies data source options.
| Aliases | options |
|---|---|
| dataSource |
For more information about specifying the dataSourceOptions parameter, see the common dataSourceOptions parameter.
importOptions={fileType="ANY" | "AUDIO" | "AUTO" | "BASESAS" | "CSV" | "DOCUMENT" | "DTA" | "ESP" | "EXCEL" | "FMT" | "HDAT" | "IMAGE" | "JMP" | "LASR" | "PARQUET" | "SPSS" | "VIDEO" | "XLS", fileType-specific-parameters}
specifies the settings for reading a table from a data source.
| Alias | import |
|---|
For more information about specifying the importOptions parameter, see the common importOptions parameter.
* name="table-name"
specifies the name of the filter table.
vars={{casinvardesc-1} <, {casinvardesc-2}, ...>}
specifies the variable names to use from the filter table.
The casinvardesc value can be one or more of the following:
format="string"
specifies the format to apply to the variable.
formattedLength=integer
specifies the length of format field plus the length of the format precision.
label="string"
specifies the descriptive label for the variable.
* name="variable-name"
specifies the name for the variable.
nfd=integer
specifies the length of the format precision.
nfl=integer
specifies the length of the format field.
where="where-expression"
specifies an expression for subsetting the data from the filter table.
modelId="string"
specifies a model ID variable name that is included in the generated DATA step scoring code. By default, this variable name is the target variable name with DL_ set as the prefix.
* modelTable={castable}
specifies the in-memory table that is the model.
| Long form | modelTable={name="table-name"} |
|---|---|
| Shortcut form | modelTable="table-name" |
| Alias | model |
|---|
The castable value can be one or more of the following:
caslib="string"
specifies the caslib for the input table that you want to use with the action. By default, the active caslib is used. Specify a value only if you need to access a table from a different caslib.
computedOnDemand=TRUE | FALSE
when set to True, creates the computed variables when the table is loaded instead of when the action begins.
| Alias | compOnDemand |
|---|---|
| Default | FALSE |
computedVars={{casinvardesc-1} <, {casinvardesc-2}, ...>}
specifies the names of the computed variables to create. Specify an expression for each variable in the computedVarsProgram parameter. If you do not specify this parameter, then all variables from computedVarsProgram are automatically included.
| Alias | compVars |
|---|
The casinvardesc value can be one or more of the following:
format="string"
specifies the format to apply to the variable.
formattedLength=integer
specifies the length of format field plus the length of the format precision.
label="string"
specifies the descriptive label for the variable.
* name="variable-name"
specifies the name for the variable.
nfd=integer
specifies the length of the format precision.
nfl=integer
specifies the length of the format field.
computedVarsProgram="string"
specifies an expression for each computed variable that you include in the computedVars parameter.
| Alias | compPgm |
|---|
dataSourceOptions={key-1=any-list-or-data-type-1 <, key-2=any-list-or-data-type-2, ...>}
specifies data source options.
| Aliases | options |
|---|---|
| dataSource |
importOptions={fileType="ANY" | "AUDIO" | "AUTO" | "BASESAS" | "CSV" | "DOCUMENT" | "DTA" | "ESP" | "EXCEL" | "FMT" | "HDAT" | "IMAGE" | "JMP" | "LASR" | "PARQUET" | "SPSS" | "VIDEO" | "XLS", fileType-specific-parameters}
specifies the settings for reading a table from a data source.
| Alias | import |
|---|
For more information about specifying the importOptions parameter, see the common importOptions parameter.
* name="table-name"
specifies the name of the input table.
singlePass=TRUE | FALSE
when set to True, does not create a transient table on the server. Setting this parameter to True can be efficient, but the data might not have stable ordering upon repeated runs.
| Default | FALSE |
|---|
vars={{casinvardesc-1} <, {casinvardesc-2}, ...>}
specifies the variables to use in the action.
The casinvardesc value can be one or more of the following:
format="string"
specifies the format to apply to the variable.
formattedLength=integer
specifies the length of format field plus the length of the format precision.
label="string"
specifies the descriptive label for the variable.
* name="variable-name"
specifies the name for the variable.
nfd=integer
specifies the length of the format precision.
nfl=integer
specifies the length of the format field.
where="where-expression"
specifies an expression for subsetting the input data.
whereTable={groupbytable}
specifies an input table that contains rows to use as a WHERE filter. If the vars parameter is not specified, then all the variable names that are common to the input table and the filtering table are used to find matching rows. If the where parameter for the input table and this parameter are specified, then this filtering table is applied first.
The groupbytable value can be one or more of the following:
casLib="string"
specifies the caslib for the filter table. By default, the active caslib is used.
dataSourceOptions={adls_noreq-parameters | bigquery-parameters | cas_noreq-parameters | clouddex-parameters | db2-parameters | dnfs-parameters | esp-parameters | fedsvr-parameters | gcs_noreq-parameters | greenplum-parameters | hadoop-parameters | hana-parameters | hdfs-parameters | impala-parameters | jdbc-parameters | mongodb-parameters | mysql-parameters | netezza-parameters | odbc-parameters | oracle-parameters | path-parameters | postgres-parameters | redshift-parameters | s3-parameters | sapiq-parameters | sforce-parameters | snowflake-parameters | spark-parameters | spde-parameters | sqlserver-parameters | ss_noreq-parameters | teradata-parameters | vertica-parameters | yellowbrick-parameters}
specifies data source options.
| Aliases | options |
|---|---|
| dataSource |
For more information about specifying the dataSourceOptions parameter, see the common dataSourceOptions parameter.
importOptions={fileType="ANY" | "AUDIO" | "AUTO" | "BASESAS" | "CSV" | "DOCUMENT" | "DTA" | "ESP" | "EXCEL" | "FMT" | "HDAT" | "IMAGE" | "JMP" | "LASR" | "PARQUET" | "SPSS" | "VIDEO" | "XLS", fileType-specific-parameters}
specifies the settings for reading a table from a data source.
| Alias | import |
|---|
For more information about specifying the importOptions parameter, see the common importOptions parameter.
* name="table-name"
specifies the name of the filter table.
vars={{casinvardesc-1} <, {casinvardesc-2}, ...>}
specifies the variable names to use from the filter table.
The casinvardesc value can be one or more of the following:
format="string"
specifies the format to apply to the variable.
formattedLength=integer
specifies the length of format field plus the length of the format precision.
label="string"
specifies the descriptive label for the variable.
* name="variable-name"
specifies the name for the variable.
nfd=integer
specifies the length of the format precision.
nfl=integer
specifies the length of the format field.
where="where-expression"
specifies an expression for subsetting the data from the filter table.
nThreads=integer
| Minimum value | 0 |
|---|
dnnCode Action
Generates DATA step scoring code from a deep neural network model.
Summary: Input and Output Tables
If a row includes a subparameter, you can specify the name, caslib, and so on in the subparameter. Otherwise, you can specify the name, caslib, and so on in the parameter.
|
Parameter |
Subparameter |
Description |
|---|---|---|
|
required parameterinitWeights |
— |
specifies an in-memory table that contains the model weights. These weights are used to initialize the model. |
|
required parametermodelTable |
— |
specifies the in-memory table that is the model. |
|
Parameter |
Subparameter |
Description |
|---|---|---|
|
casOut |
requests that the action produce SAS score code. Specify additional parameters. |
Parameter Descriptions
code={codegen}
requests that the action produce SAS score code. Specify additional parameters.
The codegen value can be one or more of the following:
casOut={casouttable}
specifies the settings for an output table.
For more information about specifying the casOut parameter, see the common casouttable parameter.
comment=true | false
when set to True, adds comments to the DATA step code.
| Default | false |
|---|
fmtWdth=integer
specifies the width to use for formatting derived numbers such as parameter estimates in the DATA step code.
| Alias | fmtWidth |
|---|---|
| Default | 20 |
| Range | 0–32 |
indentSize=integer
specifies the number of spaces to indent the DATA step code for each level.
| Default | 3 |
|---|---|
| Range | 0–10 |
labelId=integer
specifies the label ID to use in array names and statement labels in the DATA step code. By default, a random positive integer is used.
lineSize=integer
specifies the line size for the generated code.
| Default | 120 |
|---|---|
| Range | 64–254 |
noTrim=true | false
when set to True, bases the comparison of variables with formatted values on the full format width with padding. By default, leading and trailing blanks are removed from the formatted values.
| Default | false |
|---|
tabForm=true | false
when set to True, generates the code in a way that is appropriate for storing in a table.
| Alias | tableForm |
|---|---|
| Default | false |
encodeName=true | false
specifies whether to encode variable names in the generated CASout table.
| Default | false |
|---|
* initWeights={castable}
specifies an in-memory table that contains the model weights. These weights are used to initialize the model.
| Long form | initWeights={name="table-name"} |
|---|---|
| Shortcut form | initWeights="table-name" |
The castable value can be one or more of the following:
caslib="string"
specifies the caslib for the input table that you want to use with the action. By default, the active caslib is used. Specify a value only if you need to access a table from a different caslib.
computedOnDemand=true | false
when set to True, creates the computed variables when the table is loaded instead of when the action begins.
| Alias | compOnDemand |
|---|---|
| Default | false |
computedVars={{casinvardesc-1} <, {casinvardesc-2}, ...>}
specifies the names of the computed variables to create. Specify an expression for each variable in the computedVarsProgram parameter. If you do not specify this parameter, then all variables from computedVarsProgram are automatically included.
| Alias | compVars |
|---|
The casinvardesc value can be one or more of the following:
format="string"
specifies the format to apply to the variable.
formattedLength=integer
specifies the length of format field plus the length of the format precision.
label="string"
specifies the descriptive label for the variable.
* name="variable-name"
specifies the name for the variable.
nfd=integer
specifies the length of the format precision.
nfl=integer
specifies the length of the format field.
computedVarsProgram="string"
specifies an expression for each computed variable that you include in the computedVars parameter.
| Alias | compPgm |
|---|
dataSourceOptions={key-1=any-list-or-data-type-1 <, key-2=any-list-or-data-type-2, ...>}
specifies data source options.
| Aliases | options |
|---|---|
| dataSource |
importOptions={fileType="ANY" | "AUDIO" | "AUTO" | "BASESAS" | "CSV" | "DOCUMENT" | "DTA" | "ESP" | "EXCEL" | "FMT" | "HDAT" | "IMAGE" | "JMP" | "LASR" | "PARQUET" | "SPSS" | "VIDEO" | "XLS", fileType-specific-parameters}
specifies the settings for reading a table from a data source.
| Alias | import |
|---|
For more information about specifying the importOptions parameter, see the common importOptions parameter.
* name="table-name"
specifies the name of the input table.
singlePass=true | false
when set to True, does not create a transient table on the server. Setting this parameter to True can be efficient, but the data might not have stable ordering upon repeated runs.
| Default | false |
|---|
vars={{casinvardesc-1} <, {casinvardesc-2}, ...>}
specifies the variables to use in the action.
The casinvardesc value can be one or more of the following:
format="string"
specifies the format to apply to the variable.
formattedLength=integer
specifies the length of format field plus the length of the format precision.
label="string"
specifies the descriptive label for the variable.
* name="variable-name"
specifies the name for the variable.
nfd=integer
specifies the length of the format precision.
nfl=integer
specifies the length of the format field.
where="where-expression"
specifies an expression for subsetting the input data.
whereTable={groupbytable}
specifies an input table that contains rows to use as a WHERE filter. If the vars parameter is not specified, then all the variable names that are common to the input table and the filtering table are used to find matching rows. If the where parameter for the input table and this parameter are specified, then this filtering table is applied first.
The groupbytable value can be one or more of the following:
casLib="string"
specifies the caslib for the filter table. By default, the active caslib is used.
dataSourceOptions={adls_noreq-parameters | bigquery-parameters | cas_noreq-parameters | clouddex-parameters | db2-parameters | dnfs-parameters | esp-parameters | fedsvr-parameters | gcs_noreq-parameters | greenplum-parameters | hadoop-parameters | hana-parameters | hdfs-parameters | impala-parameters | jdbc-parameters | mongodb-parameters | mysql-parameters | netezza-parameters | odbc-parameters | oracle-parameters | path-parameters | postgres-parameters | redshift-parameters | s3-parameters | sapiq-parameters | sforce-parameters | snowflake-parameters | spark-parameters | spde-parameters | sqlserver-parameters | ss_noreq-parameters | teradata-parameters | vertica-parameters | yellowbrick-parameters}
specifies data source options.
| Aliases | options |
|---|---|
| dataSource |
For more information about specifying the dataSourceOptions parameter, see the common dataSourceOptions parameter.
importOptions={fileType="ANY" | "AUDIO" | "AUTO" | "BASESAS" | "CSV" | "DOCUMENT" | "DTA" | "ESP" | "EXCEL" | "FMT" | "HDAT" | "IMAGE" | "JMP" | "LASR" | "PARQUET" | "SPSS" | "VIDEO" | "XLS", fileType-specific-parameters}
specifies the settings for reading a table from a data source.
| Alias | import |
|---|
For more information about specifying the importOptions parameter, see the common importOptions parameter.
* name="table-name"
specifies the name of the filter table.
vars={{casinvardesc-1} <, {casinvardesc-2}, ...>}
specifies the variable names to use from the filter table.
The casinvardesc value can be one or more of the following:
format="string"
specifies the format to apply to the variable.
formattedLength=integer
specifies the length of format field plus the length of the format precision.
label="string"
specifies the descriptive label for the variable.
* name="variable-name"
specifies the name for the variable.
nfd=integer
specifies the length of the format precision.
nfl=integer
specifies the length of the format field.
where="where-expression"
specifies an expression for subsetting the data from the filter table.
modelId="string"
specifies a model ID variable name that is included in the generated DATA step scoring code. By default, this variable name is the target variable name with DL_ set as the prefix.
* modelTable={castable}
specifies the in-memory table that is the model.
| Long form | modelTable={name="table-name"} |
|---|---|
| Shortcut form | modelTable="table-name" |
| Alias | model |
|---|
The castable value can be one or more of the following:
caslib="string"
specifies the caslib for the input table that you want to use with the action. By default, the active caslib is used. Specify a value only if you need to access a table from a different caslib.
computedOnDemand=true | false
when set to True, creates the computed variables when the table is loaded instead of when the action begins.
| Alias | compOnDemand |
|---|---|
| Default | false |
computedVars={{casinvardesc-1} <, {casinvardesc-2}, ...>}
specifies the names of the computed variables to create. Specify an expression for each variable in the computedVarsProgram parameter. If you do not specify this parameter, then all variables from computedVarsProgram are automatically included.
| Alias | compVars |
|---|
The casinvardesc value can be one or more of the following:
format="string"
specifies the format to apply to the variable.
formattedLength=integer
specifies the length of format field plus the length of the format precision.
label="string"
specifies the descriptive label for the variable.
* name="variable-name"
specifies the name for the variable.
nfd=integer
specifies the length of the format precision.
nfl=integer
specifies the length of the format field.
computedVarsProgram="string"
specifies an expression for each computed variable that you include in the computedVars parameter.
| Alias | compPgm |
|---|
dataSourceOptions={key-1=any-list-or-data-type-1 <, key-2=any-list-or-data-type-2, ...>}
specifies data source options.
| Aliases | options |
|---|---|
| dataSource |
importOptions={fileType="ANY" | "AUDIO" | "AUTO" | "BASESAS" | "CSV" | "DOCUMENT" | "DTA" | "ESP" | "EXCEL" | "FMT" | "HDAT" | "IMAGE" | "JMP" | "LASR" | "PARQUET" | "SPSS" | "VIDEO" | "XLS", fileType-specific-parameters}
specifies the settings for reading a table from a data source.
| Alias | import |
|---|
For more information about specifying the importOptions parameter, see the common importOptions parameter.
* name="table-name"
specifies the name of the input table.
singlePass=true | false
when set to True, does not create a transient table on the server. Setting this parameter to True can be efficient, but the data might not have stable ordering upon repeated runs.
| Default | false |
|---|
vars={{casinvardesc-1} <, {casinvardesc-2}, ...>}
specifies the variables to use in the action.
The casinvardesc value can be one or more of the following:
format="string"
specifies the format to apply to the variable.
formattedLength=integer
specifies the length of format field plus the length of the format precision.
label="string"
specifies the descriptive label for the variable.
* name="variable-name"
specifies the name for the variable.
nfd=integer
specifies the length of the format precision.
nfl=integer
specifies the length of the format field.
where="where-expression"
specifies an expression for subsetting the input data.
whereTable={groupbytable}
specifies an input table that contains rows to use as a WHERE filter. If the vars parameter is not specified, then all the variable names that are common to the input table and the filtering table are used to find matching rows. If the where parameter for the input table and this parameter are specified, then this filtering table is applied first.
The groupbytable value can be one or more of the following:
casLib="string"
specifies the caslib for the filter table. By default, the active caslib is used.
dataSourceOptions={adls_noreq-parameters | bigquery-parameters | cas_noreq-parameters | clouddex-parameters | db2-parameters | dnfs-parameters | esp-parameters | fedsvr-parameters | gcs_noreq-parameters | greenplum-parameters | hadoop-parameters | hana-parameters | hdfs-parameters | impala-parameters | jdbc-parameters | mongodb-parameters | mysql-parameters | netezza-parameters | odbc-parameters | oracle-parameters | path-parameters | postgres-parameters | redshift-parameters | s3-parameters | sapiq-parameters | sforce-parameters | snowflake-parameters | spark-parameters | spde-parameters | sqlserver-parameters | ss_noreq-parameters | teradata-parameters | vertica-parameters | yellowbrick-parameters}
specifies data source options.
| Aliases | options |
|---|---|
| dataSource |
For more information about specifying the dataSourceOptions parameter, see the common dataSourceOptions parameter.
importOptions={fileType="ANY" | "AUDIO" | "AUTO" | "BASESAS" | "CSV" | "DOCUMENT" | "DTA" | "ESP" | "EXCEL" | "FMT" | "HDAT" | "IMAGE" | "JMP" | "LASR" | "PARQUET" | "SPSS" | "VIDEO" | "XLS", fileType-specific-parameters}
specifies the settings for reading a table from a data source.
| Alias | import |
|---|
For more information about specifying the importOptions parameter, see the common importOptions parameter.
* name="table-name"
specifies the name of the filter table.
vars={{casinvardesc-1} <, {casinvardesc-2}, ...>}
specifies the variable names to use from the filter table.
The casinvardesc value can be one or more of the following:
format="string"
specifies the format to apply to the variable.
formattedLength=integer
specifies the length of format field plus the length of the format precision.
label="string"
specifies the descriptive label for the variable.
* name="variable-name"
specifies the name for the variable.
nfd=integer
specifies the length of the format precision.
nfl=integer
specifies the length of the format field.
where="where-expression"
specifies an expression for subsetting the data from the filter table.
nThreads=integer
| Minimum value | 0 |
|---|
dnnCode Action
Generates DATA step scoring code from a deep neural network model.
Summary: Input and Output Tables
If a row includes a subparameter, you can specify the name, caslib, and so on in the subparameter. Otherwise, you can specify the name, caslib, and so on in the parameter.
|
Parameter |
Subparameter |
Description |
|---|---|---|
|
required parameterinitWeights |
— |
specifies an in-memory table that contains the model weights. These weights are used to initialize the model. |
|
required parametermodelTable |
— |
specifies the in-memory table that is the model. |
|
Parameter |
Subparameter |
Description |
|---|---|---|
|
casOut |
requests that the action produce SAS score code. Specify additional parameters. |
Parameter Descriptions
code={codegen}
requests that the action produce SAS score code. Specify additional parameters.
The codegen value can be one or more of the following:
"casOut":{casouttable}
specifies the settings for an output table.
For more information about specifying the casOut parameter, see the common casouttable parameter.
"comment":True | False
when set to True, adds comments to the DATA step code.
| Default | False |
|---|
"fmtWdth":integer
specifies the width to use for formatting derived numbers such as parameter estimates in the DATA step code.
| Alias | fmtWidth |
|---|---|
| Default | 20 |
| Range | 0–32 |
"indentSize":integer
specifies the number of spaces to indent the DATA step code for each level.
| Default | 3 |
|---|---|
| Range | 0–10 |
"labelId":integer
specifies the label ID to use in array names and statement labels in the DATA step code. By default, a random positive integer is used.
"lineSize":integer
specifies the line size for the generated code.
| Default | 120 |
|---|---|
| Range | 64–254 |
"noTrim":True | False
when set to True, bases the comparison of variables with formatted values on the full format width with padding. By default, leading and trailing blanks are removed from the formatted values.
| Default | False |
|---|
"tabForm":True | False
when set to True, generates the code in a way that is appropriate for storing in a table.
| Alias | tableForm |
|---|---|
| Default | False |
encodeName=True | False
specifies whether to encode variable names in the generated CASout table.
| Default | False |
|---|
* initWeights={castable}
specifies an in-memory table that contains the model weights. These weights are used to initialize the model.
| Long form | initWeights={"name":"table-name"} |
|---|---|
| Shortcut form | initWeights="table-name" |
The castable value can be one or more of the following:
"caslib":"string"
specifies the caslib for the input table that you want to use with the action. By default, the active caslib is used. Specify a value only if you need to access a table from a different caslib.
"computedOnDemand":True | False
when set to True, creates the computed variables when the table is loaded instead of when the action begins.
| Alias | compOnDemand |
|---|---|
| Default | False |
"computedVars":[{casinvardesc-1} <, {casinvardesc-2}, ...>]
specifies the names of the computed variables to create. Specify an expression for each variable in the computedVarsProgram parameter. If you do not specify this parameter, then all variables from computedVarsProgram are automatically included.
| Alias | compVars |
|---|
The casinvardesc value can be one or more of the following:
"format":"string"
specifies the format to apply to the variable.
"formattedLength":integer
specifies the length of format field plus the length of the format precision.
"label":"string"
specifies the descriptive label for the variable.
* "name":"variable-name"
specifies the name for the variable.
"nfd":integer
specifies the length of the format precision.
"nfl":integer
specifies the length of the format field.
"computedVarsProgram":"string"
specifies an expression for each computed variable that you include in the computedVars parameter.
| Alias | compPgm |
|---|
"dataSourceOptions":{"key-1":{any-list-or-data-type-1} <, "key-2":{any-list-or-data-type-2}, ...>}
specifies data source options.
| Aliases | options |
|---|---|
| dataSource |
"importOptions":{"fileType":"ANY" | "AUDIO" | "AUTO" | "BASESAS" | "CSV" | "DOCUMENT" | "DTA" | "ESP" | "EXCEL" | "FMT" | "HDAT" | "IMAGE" | "JMP" | "LASR" | "PARQUET" | "SPSS" | "VIDEO" | "XLS", fileType-specific-parameters}
specifies the settings for reading a table from a data source.
| Alias | import_ |
|---|
For more information about specifying the importOptions parameter, see the common importOptions parameter.
* "name":"table-name"
specifies the name of the input table.
"singlePass":True | False
when set to True, does not create a transient table on the server. Setting this parameter to True can be efficient, but the data might not have stable ordering upon repeated runs.
| Default | False |
|---|
"vars":[{casinvardesc-1} <, {casinvardesc-2}, ...>]
specifies the variables to use in the action.
The casinvardesc value can be one or more of the following:
"format":"string"
specifies the format to apply to the variable.
"formattedLength":integer
specifies the length of format field plus the length of the format precision.
"label":"string"
specifies the descriptive label for the variable.
* "name":"variable-name"
specifies the name for the variable.
"nfd":integer
specifies the length of the format precision.
"nfl":integer
specifies the length of the format field.
"where":"where-expression"
specifies an expression for subsetting the input data.
"whereTable":{groupbytable}
specifies an input table that contains rows to use as a WHERE filter. If the vars parameter is not specified, then all the variable names that are common to the input table and the filtering table are used to find matching rows. If the where parameter for the input table and this parameter are specified, then this filtering table is applied first.
The groupbytable value can be one or more of the following:
"casLib":"string"
specifies the caslib for the filter table. By default, the active caslib is used.
"dataSourceOptions":{adls_noreq-parameters | bigquery-parameters | cas_noreq-parameters | clouddex-parameters | db2-parameters | dnfs-parameters | esp-parameters | fedsvr-parameters | gcs_noreq-parameters | greenplum-parameters | hadoop-parameters | hana-parameters | hdfs-parameters | impala-parameters | jdbc-parameters | mongodb-parameters | mysql-parameters | netezza-parameters | odbc-parameters | oracle-parameters | path-parameters | postgres-parameters | redshift-parameters | s3-parameters | sapiq-parameters | sforce-parameters | snowflake-parameters | spark-parameters | spde-parameters | sqlserver-parameters | ss_noreq-parameters | teradata-parameters | vertica-parameters | yellowbrick-parameters}
specifies data source options.
| Aliases | options |
|---|---|
| dataSource |
For more information about specifying the dataSourceOptions parameter, see the common dataSourceOptions parameter.
"importOptions":{"fileType":"ANY" | "AUDIO" | "AUTO" | "BASESAS" | "CSV" | "DOCUMENT" | "DTA" | "ESP" | "EXCEL" | "FMT" | "HDAT" | "IMAGE" | "JMP" | "LASR" | "PARQUET" | "SPSS" | "VIDEO" | "XLS", fileType-specific-parameters}
specifies the settings for reading a table from a data source.
| Alias | import_ |
|---|
For more information about specifying the importOptions parameter, see the common importOptions parameter.
* "name":"table-name"
specifies the name of the filter table.
"vars":[{casinvardesc-1} <, {casinvardesc-2}, ...>]
specifies the variable names to use from the filter table.
The casinvardesc value can be one or more of the following:
"format":"string"
specifies the format to apply to the variable.
"formattedLength":integer
specifies the length of format field plus the length of the format precision.
"label":"string"
specifies the descriptive label for the variable.
* "name":"variable-name"
specifies the name for the variable.
"nfd":integer
specifies the length of the format precision.
"nfl":integer
specifies the length of the format field.
"where":"where-expression"
specifies an expression for subsetting the data from the filter table.
modelId="string"
specifies a model ID variable name that is included in the generated DATA step scoring code. By default, this variable name is the target variable name with DL_ set as the prefix.
* modelTable={castable}
specifies the in-memory table that is the model.
| Long form | modelTable={"name":"table-name"} |
|---|---|
| Shortcut form | modelTable="table-name" |
| Alias | model |
|---|
The castable value can be one or more of the following:
"caslib":"string"
specifies the caslib for the input table that you want to use with the action. By default, the active caslib is used. Specify a value only if you need to access a table from a different caslib.
"computedOnDemand":True | False
when set to True, creates the computed variables when the table is loaded instead of when the action begins.
| Alias | compOnDemand |
|---|---|
| Default | False |
"computedVars":[{casinvardesc-1} <, {casinvardesc-2}, ...>]
specifies the names of the computed variables to create. Specify an expression for each variable in the computedVarsProgram parameter. If you do not specify this parameter, then all variables from computedVarsProgram are automatically included.
| Alias | compVars |
|---|
The casinvardesc value can be one or more of the following:
"format":"string"
specifies the format to apply to the variable.
"formattedLength":integer
specifies the length of format field plus the length of the format precision.
"label":"string"
specifies the descriptive label for the variable.
* "name":"variable-name"
specifies the name for the variable.
"nfd":integer
specifies the length of the format precision.
"nfl":integer
specifies the length of the format field.
"computedVarsProgram":"string"
specifies an expression for each computed variable that you include in the computedVars parameter.
| Alias | compPgm |
|---|
"dataSourceOptions":{"key-1":{any-list-or-data-type-1} <, "key-2":{any-list-or-data-type-2}, ...>}
specifies data source options.
| Aliases | options |
|---|---|
| dataSource |
"importOptions":{"fileType":"ANY" | "AUDIO" | "AUTO" | "BASESAS" | "CSV" | "DOCUMENT" | "DTA" | "ESP" | "EXCEL" | "FMT" | "HDAT" | "IMAGE" | "JMP" | "LASR" | "PARQUET" | "SPSS" | "VIDEO" | "XLS", fileType-specific-parameters}
specifies the settings for reading a table from a data source.
| Alias | import_ |
|---|
For more information about specifying the importOptions parameter, see the common importOptions parameter.
* "name":"table-name"
specifies the name of the input table.
"singlePass":True | False
when set to True, does not create a transient table on the server. Setting this parameter to True can be efficient, but the data might not have stable ordering upon repeated runs.
| Default | False |
|---|
"vars":[{casinvardesc-1} <, {casinvardesc-2}, ...>]
specifies the variables to use in the action.
The casinvardesc value can be one or more of the following:
"format":"string"
specifies the format to apply to the variable.
"formattedLength":integer
specifies the length of format field plus the length of the format precision.
"label":"string"
specifies the descriptive label for the variable.
* "name":"variable-name"
specifies the name for the variable.
"nfd":integer
specifies the length of the format precision.
"nfl":integer
specifies the length of the format field.
"where":"where-expression"
specifies an expression for subsetting the input data.
"whereTable":{groupbytable}
specifies an input table that contains rows to use as a WHERE filter. If the vars parameter is not specified, then all the variable names that are common to the input table and the filtering table are used to find matching rows. If the where parameter for the input table and this parameter are specified, then this filtering table is applied first.
The groupbytable value can be one or more of the following:
"casLib":"string"
specifies the caslib for the filter table. By default, the active caslib is used.
"dataSourceOptions":{adls_noreq-parameters | bigquery-parameters | cas_noreq-parameters | clouddex-parameters | db2-parameters | dnfs-parameters | esp-parameters | fedsvr-parameters | gcs_noreq-parameters | greenplum-parameters | hadoop-parameters | hana-parameters | hdfs-parameters | impala-parameters | jdbc-parameters | mongodb-parameters | mysql-parameters | netezza-parameters | odbc-parameters | oracle-parameters | path-parameters | postgres-parameters | redshift-parameters | s3-parameters | sapiq-parameters | sforce-parameters | snowflake-parameters | spark-parameters | spde-parameters | sqlserver-parameters | ss_noreq-parameters | teradata-parameters | vertica-parameters | yellowbrick-parameters}
specifies data source options.
| Aliases | options |
|---|---|
| dataSource |
For more information about specifying the dataSourceOptions parameter, see the common dataSourceOptions parameter.
"importOptions":{"fileType":"ANY" | "AUDIO" | "AUTO" | "BASESAS" | "CSV" | "DOCUMENT" | "DTA" | "ESP" | "EXCEL" | "FMT" | "HDAT" | "IMAGE" | "JMP" | "LASR" | "PARQUET" | "SPSS" | "VIDEO" | "XLS", fileType-specific-parameters}
specifies the settings for reading a table from a data source.
| Alias | import_ |
|---|
For more information about specifying the importOptions parameter, see the common importOptions parameter.
* "name":"table-name"
specifies the name of the filter table.
"vars":[{casinvardesc-1} <, {casinvardesc-2}, ...>]
specifies the variable names to use from the filter table.
The casinvardesc value can be one or more of the following:
"format":"string"
specifies the format to apply to the variable.
"formattedLength":integer
specifies the length of format field plus the length of the format precision.
"label":"string"
specifies the descriptive label for the variable.
* "name":"variable-name"
specifies the name for the variable.
"nfd":integer
specifies the length of the format precision.
"nfl":integer
specifies the length of the format field.
"where":"where-expression"
specifies an expression for subsetting the data from the filter table.
nThreads=integer
| Minimum value | 0 |
|---|
dnnCode Action
Generates DATA step scoring code from a deep neural network model.
Summary: Input and Output Tables
If a row includes a subparameter, you can specify the name, caslib, and so on in the subparameter. Otherwise, you can specify the name, caslib, and so on in the parameter.
|
Parameter |
Subparameter |
Description |
|---|---|---|
|
required parameterinitWeights |
— |
specifies an in-memory table that contains the model weights. These weights are used to initialize the model. |
|
required parametermodelTable |
— |
specifies the in-memory table that is the model. |
|
Parameter |
Subparameter |
Description |
|---|---|---|
|
casOut |
requests that the action produce SAS score code. Specify additional parameters. |
Parameter Descriptions
code=list(codegen)
requests that the action produce SAS score code. Specify additional parameters.
The codegen value can be one or more of the following:
casOut=list(casouttable)
specifies the settings for an output table.
For more information about specifying the casOut parameter, see the common casouttable parameter.
comment=TRUE | FALSE
when set to True, adds comments to the DATA step code.
| Default | FALSE |
|---|
fmtWdth=integer
specifies the width to use for formatting derived numbers such as parameter estimates in the DATA step code.
| Alias | fmtWidth |
|---|---|
| Default | 20 |
| Range | 0–32 |
indentSize=integer
specifies the number of spaces to indent the DATA step code for each level.
| Default | 3 |
|---|---|
| Range | 0–10 |
labelId=integer
specifies the label ID to use in array names and statement labels in the DATA step code. By default, a random positive integer is used.
lineSize=integer
specifies the line size for the generated code.
| Default | 120 |
|---|---|
| Range | 64–254 |
noTrim=TRUE | FALSE
when set to True, bases the comparison of variables with formatted values on the full format width with padding. By default, leading and trailing blanks are removed from the formatted values.
| Default | FALSE |
|---|
tabForm=TRUE | FALSE
when set to True, generates the code in a way that is appropriate for storing in a table.
| Alias | tableForm |
|---|---|
| Default | FALSE |
encodeName=TRUE | FALSE
specifies whether to encode variable names in the generated CASout table.
| Default | FALSE |
|---|
* initWeights=list(castable)
specifies an in-memory table that contains the model weights. These weights are used to initialize the model.
| Long form | initWeights=list(name="table-name") |
|---|---|
| Shortcut form | initWeights="table-name" |
The castable value can be one or more of the following:
caslib="string"
specifies the caslib for the input table that you want to use with the action. By default, the active caslib is used. Specify a value only if you need to access a table from a different caslib.
computedOnDemand=TRUE | FALSE
when set to True, creates the computed variables when the table is loaded instead of when the action begins.
| Alias | compOnDemand |
|---|---|
| Default | FALSE |
computedVars=list( list(casinvardesc-1) <, list(casinvardesc-2), ...>)
specifies the names of the computed variables to create. Specify an expression for each variable in the computedVarsProgram parameter. If you do not specify this parameter, then all variables from computedVarsProgram are automatically included.
| Alias | compVars |
|---|
The casinvardesc value can be one or more of the following:
format="string"
specifies the format to apply to the variable.
formattedLength=integer
specifies the length of format field plus the length of the format precision.
label="string"
specifies the descriptive label for the variable.
* name="variable-name"
specifies the name for the variable.
nfd=integer
specifies the length of the format precision.
nfl=integer
specifies the length of the format field.
computedVarsProgram="string"
specifies an expression for each computed variable that you include in the computedVars parameter.
| Alias | compPgm |
|---|
dataSourceOptions=list(key-1=list(any-list-or-data-type-1) <, key-2=list(any-list-or-data-type-2), ...>)
specifies data source options.
| Aliases | options |
|---|---|
| dataSource |
importOptions=list(fileType="ANY" | "AUDIO" | "AUTO" | "BASESAS" | "CSV" | "DOCUMENT" | "DTA" | "ESP" | "EXCEL" | "FMT" | "HDAT" | "IMAGE" | "JMP" | "LASR" | "PARQUET" | "SPSS" | "VIDEO" | "XLS", fileType-specific-parameters)
specifies the settings for reading a table from a data source.
| Alias | import |
|---|
For more information about specifying the importOptions parameter, see the common importOptions parameter.
* name="table-name"
specifies the name of the input table.
singlePass=TRUE | FALSE
when set to True, does not create a transient table on the server. Setting this parameter to True can be efficient, but the data might not have stable ordering upon repeated runs.
| Default | FALSE |
|---|
vars=list( list(casinvardesc-1) <, list(casinvardesc-2), ...>)
specifies the variables to use in the action.
The casinvardesc value can be one or more of the following:
format="string"
specifies the format to apply to the variable.
formattedLength=integer
specifies the length of format field plus the length of the format precision.
label="string"
specifies the descriptive label for the variable.
* name="variable-name"
specifies the name for the variable.
nfd=integer
specifies the length of the format precision.
nfl=integer
specifies the length of the format field.
where="where-expression"
specifies an expression for subsetting the input data.
whereTable=list(groupbytable)
specifies an input table that contains rows to use as a WHERE filter. If the vars parameter is not specified, then all the variable names that are common to the input table and the filtering table are used to find matching rows. If the where parameter for the input table and this parameter are specified, then this filtering table is applied first.
The groupbytable value can be one or more of the following:
casLib="string"
specifies the caslib for the filter table. By default, the active caslib is used.
dataSourceOptions=list(adls_noreq-parameters | bigquery-parameters | cas_noreq-parameters | clouddex-parameters | db2-parameters | dnfs-parameters | esp-parameters | fedsvr-parameters | gcs_noreq-parameters | greenplum-parameters | hadoop-parameters | hana-parameters | hdfs-parameters | impala-parameters | jdbc-parameters | mongodb-parameters | mysql-parameters | netezza-parameters | odbc-parameters | oracle-parameters | path-parameters | postgres-parameters | redshift-parameters | s3-parameters | sapiq-parameters | sforce-parameters | snowflake-parameters | spark-parameters | spde-parameters | sqlserver-parameters | ss_noreq-parameters | teradata-parameters | vertica-parameters | yellowbrick-parameters)
specifies data source options.
| Aliases | options |
|---|---|
| dataSource |
For more information about specifying the dataSourceOptions parameter, see the common dataSourceOptions parameter.
importOptions=list(fileType="ANY" | "AUDIO" | "AUTO" | "BASESAS" | "CSV" | "DOCUMENT" | "DTA" | "ESP" | "EXCEL" | "FMT" | "HDAT" | "IMAGE" | "JMP" | "LASR" | "PARQUET" | "SPSS" | "VIDEO" | "XLS", fileType-specific-parameters)
specifies the settings for reading a table from a data source.
| Alias | import |
|---|
For more information about specifying the importOptions parameter, see the common importOptions parameter.
* name="table-name"
specifies the name of the filter table.
vars=list( list(casinvardesc-1) <, list(casinvardesc-2), ...>)
specifies the variable names to use from the filter table.
The casinvardesc value can be one or more of the following:
format="string"
specifies the format to apply to the variable.
formattedLength=integer
specifies the length of format field plus the length of the format precision.
label="string"
specifies the descriptive label for the variable.
* name="variable-name"
specifies the name for the variable.
nfd=integer
specifies the length of the format precision.
nfl=integer
specifies the length of the format field.
where="where-expression"
specifies an expression for subsetting the data from the filter table.
modelId="string"
specifies a model ID variable name that is included in the generated DATA step scoring code. By default, this variable name is the target variable name with DL_ set as the prefix.
* modelTable=list(castable)
specifies the in-memory table that is the model.
| Long form | modelTable=list(name="table-name") |
|---|---|
| Shortcut form | modelTable="table-name" |
| Alias | model |
|---|
The castable value can be one or more of the following:
caslib="string"
specifies the caslib for the input table that you want to use with the action. By default, the active caslib is used. Specify a value only if you need to access a table from a different caslib.
computedOnDemand=TRUE | FALSE
when set to True, creates the computed variables when the table is loaded instead of when the action begins.
| Alias | compOnDemand |
|---|---|
| Default | FALSE |
computedVars=list( list(casinvardesc-1) <, list(casinvardesc-2), ...>)
specifies the names of the computed variables to create. Specify an expression for each variable in the computedVarsProgram parameter. If you do not specify this parameter, then all variables from computedVarsProgram are automatically included.
| Alias | compVars |
|---|
The casinvardesc value can be one or more of the following:
format="string"
specifies the format to apply to the variable.
formattedLength=integer
specifies the length of format field plus the length of the format precision.
label="string"
specifies the descriptive label for the variable.
* name="variable-name"
specifies the name for the variable.
nfd=integer
specifies the length of the format precision.
nfl=integer
specifies the length of the format field.
computedVarsProgram="string"
specifies an expression for each computed variable that you include in the computedVars parameter.
| Alias | compPgm |
|---|
dataSourceOptions=list(key-1=list(any-list-or-data-type-1) <, key-2=list(any-list-or-data-type-2), ...>)
specifies data source options.
| Aliases | options |
|---|---|
| dataSource |
importOptions=list(fileType="ANY" | "AUDIO" | "AUTO" | "BASESAS" | "CSV" | "DOCUMENT" | "DTA" | "ESP" | "EXCEL" | "FMT" | "HDAT" | "IMAGE" | "JMP" | "LASR" | "PARQUET" | "SPSS" | "VIDEO" | "XLS", fileType-specific-parameters)
specifies the settings for reading a table from a data source.
| Alias | import |
|---|
For more information about specifying the importOptions parameter, see the common importOptions parameter.
* name="table-name"
specifies the name of the input table.
singlePass=TRUE | FALSE
when set to True, does not create a transient table on the server. Setting this parameter to True can be efficient, but the data might not have stable ordering upon repeated runs.
| Default | FALSE |
|---|
vars=list( list(casinvardesc-1) <, list(casinvardesc-2), ...>)
specifies the variables to use in the action.
The casinvardesc value can be one or more of the following:
format="string"
specifies the format to apply to the variable.
formattedLength=integer
specifies the length of format field plus the length of the format precision.
label="string"
specifies the descriptive label for the variable.
* name="variable-name"
specifies the name for the variable.
nfd=integer
specifies the length of the format precision.
nfl=integer
specifies the length of the format field.
where="where-expression"
specifies an expression for subsetting the input data.
whereTable=list(groupbytable)
specifies an input table that contains rows to use as a WHERE filter. If the vars parameter is not specified, then all the variable names that are common to the input table and the filtering table are used to find matching rows. If the where parameter for the input table and this parameter are specified, then this filtering table is applied first.
The groupbytable value can be one or more of the following:
casLib="string"
specifies the caslib for the filter table. By default, the active caslib is used.
dataSourceOptions=list(adls_noreq-parameters | bigquery-parameters | cas_noreq-parameters | clouddex-parameters | db2-parameters | dnfs-parameters | esp-parameters | fedsvr-parameters | gcs_noreq-parameters | greenplum-parameters | hadoop-parameters | hana-parameters | hdfs-parameters | impala-parameters | jdbc-parameters | mongodb-parameters | mysql-parameters | netezza-parameters | odbc-parameters | oracle-parameters | path-parameters | postgres-parameters | redshift-parameters | s3-parameters | sapiq-parameters | sforce-parameters | snowflake-parameters | spark-parameters | spde-parameters | sqlserver-parameters | ss_noreq-parameters | teradata-parameters | vertica-parameters | yellowbrick-parameters)
specifies data source options.
| Aliases | options |
|---|---|
| dataSource |
For more information about specifying the dataSourceOptions parameter, see the common dataSourceOptions parameter.
importOptions=list(fileType="ANY" | "AUDIO" | "AUTO" | "BASESAS" | "CSV" | "DOCUMENT" | "DTA" | "ESP" | "EXCEL" | "FMT" | "HDAT" | "IMAGE" | "JMP" | "LASR" | "PARQUET" | "SPSS" | "VIDEO" | "XLS", fileType-specific-parameters)
specifies the settings for reading a table from a data source.
| Alias | import |
|---|
For more information about specifying the importOptions parameter, see the common importOptions parameter.
* name="table-name"
specifies the name of the filter table.
vars=list( list(casinvardesc-1) <, list(casinvardesc-2), ...>)
specifies the variable names to use from the filter table.
The casinvardesc value can be one or more of the following:
format="string"
specifies the format to apply to the variable.
formattedLength=integer
specifies the length of format field plus the length of the format precision.
label="string"
specifies the descriptive label for the variable.
* name="variable-name"
specifies the name for the variable.
nfd=integer
specifies the length of the format precision.
nfl=integer
specifies the length of the format field.
where="where-expression"
specifies an expression for subsetting the data from the filter table.
nThreads=integer
| Minimum value | 0 |
|---|